Samsung Dishwasher Not Draining: Troubleshooting Tips and Solutions

Samsung Dishwasher Not Draining) If you’re encountering the frustrating issue of a Samsung dishwasher not draining properly, you’re not alone. Many homeowners have faced this problem at some point. A dishwasher that fails to drain can lead to dirty dishes, standing water, and even potential damage to the appliance. In this article, we will discuss common reasons why a Samsung dishwasher may not be draining and provide you with troubleshooting tips and solutions to get it back in working order.

Clogged Drain Hose

Samsung Dishwasher Not Draining) One common culprit behind a Samsung dishwasher not draining is a clogged drain hose. Over time, debris, food particles, and soap scum can accumulate in the hose, obstructing the flow of water. To check for a clog, locate the drain hose at the back of the dishwasher and disconnect it. Inspect the hose for any blockages and use a long, flexible brush or pipe cleaner to remove them. Reconnect the hose securely and test the dishwasher to see if the problem is resolved.

Blocked Air Gap

Samsung Dishwasher Not Draining) Another potential reason for a Samsung dishwasher not draining is a blocked air gap. The air gap is a device located on the sink or countertop next to the dishwasher that prevents dirty water from flowing back into the dishwasher. If the air gap becomes obstructed with debris, it can impede proper drainage. Clean the air gap by removing the cover and clearing any debris inside. Rinse it thoroughly and reassemble it. Test the dishwasher to see if the issue persists.

Malfunctioning Drain Pump

Samsung Dishwasher Not Draining) A malfunctioning drain pump could also be the cause of a Samsung dishwasher not draining. The drain pump is responsible for removing water from the dishwasher at the end of each cycle. If it fails to function correctly, water may accumulate, resulting in a drainage problem. To check the drain pump, access the bottom of the dishwasher and locate the pump. Inspect it for any signs of damage or blockages. If necessary, clean the pump or replace it with a new one.

Faulty Drain Solenoid

Samsung Dishwasher Not Draining) The drain solenoid is an electrical component that controls the opening and closing of the drain valve. If the solenoid is faulty, it may not allow water to drain properly from the dishwasher. You can test the drain solenoid using a multimeter to determine if it’s functioning correctly. If it’s defective, you will need to replace it to resolve the draining issue.

Drain Impeller Blockage

Samsung Dishwasher Not Draining) The drain impeller is a small, fan-like component that helps propel water out of the dishwasher during the draining process. If the impeller becomes blocked or damaged, it can hinder proper drainage. To inspect the drain impeller, remove the dishwasher’s bottom rack and spray arm. You should be able to access the impeller from this location. Check for any debris or obstructions and remove them carefully. Reassemble the dishwasher and test if the draining problem has been resolved.


Samsung Dishwasher Not Draining) Dealing with a Samsung dishwasher not draining can be frustrating, but with the right troubleshooting steps, you can often resolve the issue without calling for professional help. By checking for a clogged drain hose, clearing a blocked air gap, inspecting the drain pump and solenoid, and examining the drain impeller, you can identify and address common causes of drainage problems. Remember to consult your dishwasher’s manual or contact Samsung customer support for specific guidance related to your model. With a little patience and

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button